Vista Ademco -10SE User's Guide download pdf (Page 19)

– 19 –

Security Codes & Authority Levels (cont’d)

RF BUTTON ?

0 = NO , 1 = YES

This prompt will appear if a 5800 series

button transmitter has been supplied and has

not yet been assigned to a user. Press 1 if a

button transmitter will be assigned to this

user. Otherwise press 0.

ENTER BUTTON ZN #

(001-128)

If assigning a button transmitter, this prompt

will appear. Enter the button's zone number

(see your installer for zone number).

MULTI-ACCESS ?

0 = NO , 1 = YES

If you as a user have access to other

partitions, the keypad will prompt for ability

of this new user to access (GOTO) those

partitions. Press 0 (NO) or 1 (YES). If no, the

system activates this user code and exits “Add

a User” mode. If yes, the keypad prompts for

the Global Arm option for this user.

GLOBAL ARM ?

0 = NO , 1 = YES

Press 1 (YES) if this user will be allowed to

try to arm more than one partition at the

same time. Press 0 if this user will arm only

his assigned partition.

PART.2 - SHOP?

0 = NO , 1 = YES

The keypad now prompts for the user’s access

to the next partition (see GOTO command).

Again press 0 or 1. If yes, the system will

automatically assign a user number for use in

that partition and will prompt for the

authority level and global arm option for this

user within the partition (see previous steps).

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 79 80

Comments to this Manuals

No comments