Vista Ademco -10SE User's Guide download pdf (Page 30)

– 30 –

Bypassing Protection Zones

Using the 6 BYPASS Key

This key is used when you want to arm your system with one or more

zones intentionally unprotected. Bypassed zones are unprotected and

will not cause an alarm when violated while your system is armed. All

bypasses are removed when an OFF sequence (security code plus

OFF) is performed. Bypasses are also removed if the arming

procedure that follows the bypass command is not successful.

Note: The system will not allow fire or emergency zones to be

bypassed.

To bypass zones, the system must be disarmed first.

BYPASS

1. Enter your security code and press 6 .

2. Enter zone number(s) for the zones to be bypassed (e.g., 001, 002,

003, etc.).

Important! All single-digit numbers must be preceded by “00” (for

example, enter 001 for zone 1).

BYPASS 007 FRONT

UPSTAIRS BEDROOM

Typical bypass message

When finished, the keypad will display the

word BYPASS along with each bypassed

zone number. Wait for these zones to be

displayed before arming. Arming the

system before bypassed zones are

displayed eliminates all bypasses.

DISARMED BYPASS

READY TO ARM

Arm the system as usual when the keypad

displays "ready" to arm message.

1 2 ... 25 26 27 28 29 30 31 32 33 34 35 ... 79 80

No comments

Vista Ademco -10SE User's Guide Page 30