Vista Ademco -10SE User's Guide download pdf (Page 20)

– 20 –

Security Codes & Authority Levels (cont’d)

PART. 1 A0

WHSE

USER 003 AUTH=3G.

When all partitions have been displayed, the

keypad will scroll through the partition(s) to

which access has been assigned, and will

display the user number, authority level and

global arm option for each. The “G” after the

authority level indicates that the global arm

feature is active for this user in the displayed

partition. The "*" indicates the partition from

which this user can be changed or deleted.

The "." at the end of the second line indicates

that this user sends open/close reports.

Open/close reporting is automatically active

for any users added by you, if you have

open/close reporting active.

To Change a User's Code

CODE

1. Enter Master or Manager code and press the 8 key + user

number to be changed.

2. Enter the new code for that user.

ADD NEW USER?

0 = NO , 1 = YES

The system will recognize that the user

number is already in use and will prompt

whether or not this is a new user. Enter 0

to change the existing user's code to the

code entered in step 3.

USER 002 CHANGED

SUCCESSFULLY

The system will confirm that the change is

allowed based on authorization level, and if

so, will put the new code into effect.

Note that if changing one’s own code,

the system will prompt for the new code to

be reentered. This prevents accidentally

changing one's own code.

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 79 80

No comments

Vista Ademco -10SE User's Guide Page 20