Vista Ademco -10SE User's Guide download pdf (Page 68)

– 68 –

Maintaining Your System (cont’d)

Note: The low battery message comes on as a warning that battery

replacement in indicated sensor(s) is due within 30 days. In the

meantime, the sensor(s) causing the low battery indication is still

fully operational.

Important: Use only batteries recommended by your installer as

replacement.

Silencing Low Battery Warning Tones at the Keypad

The keypad’s warning tones can be silenced by performing an OFF

sequence (code plus OFF key), but the Keypad's low battery message

display will remain on as a reminder that you have a low battery

condition in one or more of your sensors. When you replace the weak

battery with a fresh one, the sensor will send a "good battery" signal

to the control as soon as the sensor is activated (opening/closing of

door, window, etc.), causing the low battery display to turn off. If the

sensor is not activated, the display will automatically clear within

approximately 1 hour.

Routine Care

• Treat the components of your security system as you would any

other electrical equipment. Do not slam sensor-protected doors or

windows.

• Keep dust from accumulating on the keypad and all protective

sensors, particularly on motion sensors and smoke detectors.

• The keypad and sensors should be cleaned carefully with a dry soft

cloth. Do not spray water or any other fluid on the units.

1 2 ... 63 64 65 66 67 68 69 70 71 72 73 ... 79 80

No comments

Vista Ademco -10SE User's Guide Page 68