Vista 0150-0267A User Manual download pdf (Page 10)

Vista Solo 1-6 0150-0267A

Videoloss Out

The Videoloss Out signal is activated when the unit experiences

videoloss on the video input (Composite).

In the event of videoloss, VIDEOLOSS will be indicated near the

upper left hand corner of the primary monitor.

Output: Open Collector

High: Transistor Off

Low: Transistor On

Active When On.

Current Out: 10mA Max

Minimum Duration: 0.5 Seconds

Disk End Out

The Disk End Out is activated when there is 5 minutes of

recording space left on the hard disk. The Vista Solo must be in

Record mode and set to Continuous Overwrite mode.

Output: Open Collector

High: Transistor Off

Low: Transistor On

Active When On.

Current Out: 10mA Max

Minimum Duration: 0.5 Seconds

1.9 Setting the Time and Date

It is recommended that, as a minimum, the following menu items be configured before using the unit.

For detailed information about using the menu system, see section 3.

o Main Menu → Time/Date → Set Time Format

Time Format Setup

Select Format

12 Hour

To set the Time format, use the Arrow buttons to select the desired

Time format. Format the time as either:

• 12 HOUR

• 24 HOUR

Press the Enter button to confirm the selection and exit the menu.

--OR—

Press the Menu button to exit the menu without making changes.

o Main Menu → Time/Date → Set Date Format

Date Format Setup

Select Format

MM/DD/YY

To set the Date format, use the Arrow buttons to select the desired Date

format. Format the Date as either:

• DD/MM/YY

• MM/DD/YY

• YY/MM/DD

Press the Enter button to confirm the selection and exit the menu.

--OR—

Press the Menu button to exit the menu without making changes.

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 45 46

Comments to this Manuals

No comments

Vista 0150-0267A User Manual Page 10

Comments to this Manuals